What to do if Kyocera KM-2560 All in One Printer says 'FAX box limit exceeded'?
If your Kyocera All in One Printer displays 'FAX box limit exceeded', it means the FAX Box capacity is full. Press [OK] to cancel the job. To proceed, either print or delete data in the FAX Box and then try the job again.
What to do if my Kyocera KM-2560 All in One Printer cannot print?
If your Kyocera All in One Printer is unable to print, check the following: * Ensure the power cord is plugged into an AC outlet. * Turn on the main power switch. * Connect the correct printer cable securely. * Power on the machine after connecting the printer cable. * If "Press Status Key..." is displayed, press the Status/Job Cancel key, select [Printing Jobs], and then [Resume All Print Jobs] to restart printing.
What to do when Kyocera All in One Printer shows paper jam?
If a paper jam occurs in your Kyocera All in One Printer, the machine will stop, and the location of the jam will be indicated on the touch panel. Leave the machine on and follow the instructions to remove the jammed paper.
Why can't I send documents from my Kyocera KM-2560 All in One Printer?
There are several reasons why you might not be able to send a document: * The modular cord may not be connected correctly. Ensure it is properly connected. * A communication error might be occurring. Remedy the cause of the error and try sending again. * The TX (transmission) restriction might be activated. Cancel the TX restriction.
What to do if Kyocera KM-2560 All in One Printer says 'Cannot execute this job. Restricted by Job Accounting'?
If your Kyocera All in One Printer says 'Cannot execute this job. Restricted by Job Accounting', it means fax transmission is prohibited by Job Accounting, and no further operation is possible. Press [End] to cancel the job and check the Job Accounting settings.
Why can't my Kyocera KM-2560 use polling reception?
This issue arises if polling transmission is not being used correctly on the sending machine. Check with the recipient to ensure they are using polling transmission correctly.
What to do if Kyocera KM-2560 All in One Printer is restricted by Job Accounting?
Fax transmission is prohibited by Job Accounting. No further operation is possible. Press [End]. The job is canceled. Check the setting for Job Accounting.
Why can't my Kyocera KM-2560 All in One Printer perform sub address transmission?
There are several possible reasons: * The recipient fax machine may not be equipped with a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. * The entered sub address or sub address password may not be identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. This machine does not use a sub address password for reception. * There may not be free space available in the memory of the recipient fax machine. Check with the recipient.
What to do if scheduled sending jobs exceeded on Kyocera All in One Printer?
The number of jobs has exceeded the limit set for delayed transmission. Press [OK]. The job is canceled. Wait until the delayed transmission is executed, or cancel the delayed transmission and then perform the job again.
Why can't my Kyocera KM-2560 store memory forwarding data in a FAX Box?
There are two possible causes: * The FAX Box may not be specified correctly. Check the memory forwarding setting. * There may not be enough free space available in the memory. Receive after the memory has free space, or create free space in the memory.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Connectivity | USB 2.0, Ethernet |
| Type | All-in-One Printer |
| Print Speed | 25 ppm |
| Copy Speed | 25 cpm |
| Zoom Range | 25% - 400% |
| Supported Paper Sizes | A4, A5, B5, Legal, Letter |
| Warm-Up Time | Less than 30 seconds |
To Next Page
