Kyocera KM-2560

2H0/2HZ-1
1-5-52
(8) Detaching and refitting the fuser thermostats 1 and 2
Follow the procedure below to replace the fuser thermostats 1 and 2.
Procedure
1. Remove the fuser unit (see page 1-5-41).
2. Remove four claws and remove the fuser
unit cover.
Figure 1-5-94
3. Remove four tabs.
Figure 1-5-95
Fuser unit cover
Claw
Claw
Claw
Claw
Tab
Tab
Tab
Tab