Kyocera KM-2560

2H0/2HZ
1-4-8
Optional
finisher
94
Paper entry sensor
stay/remaining jam
(document finisher
only)
The paper entry sensor (PES) is not turned off within
specified time its turning on.
Depends on paper
size
The paper entry sensor (PES) is not turned off within
specified time its turning on.
-
95
Paper conveying sen-
sor jam (document fin-
isher only)
The paper conveying sensor (PCS) does not turn on
within specified time of reverse sensor (REVS) turning
on.
-
The paper conveying sensor (PCS) does not turn off
within specified time of reverse sensor (REVS) turning
off.
-
96
Jam between the built-
in finisher and machine
(built-in finisher only)
The paper conveying switch (PCSW) is not turned on
within the specified time when paper is ejected to the fin-
isher tray from the process table.
2000 ms
Section Description Conditions Specified time