PRESCRIBE Command Reference
130
For example, the character assigned to character code 93 (hex 5D) varies according to
the country code as follows:
The code-set parameter adjusts for the different symbol sets. According to the code-set
parameter specified, the printer selects a symbol set available to the current emulation.
The default country-code value appears as the U6 parameter and can be set using an
FRPO command. The factory setting is 0: the standard US ASCII symbol set. The
default code-set value appears as the U7 parameter. The factory setting is 0.
Symbol Sets Available with INTL
US ]
France §
Germany Ü
Denmark Ã…
Italy é
Spain ¿
Country-code
Code-set (emulation)
0
(Epson)
1
(HP LaserJet)
a
a
The INTL command is primarily intended to access foreign characters not found in a current symbol
set. (Default is US ASCII). It does not fully support all of the HP LaserJet symbol sets. To use one of
the HP symbol sets not listed above, see the CSET command page.
2
(Daisywheel)
4
(IBM/Line Printer)
0
b
(US ASCII)
b
Factory-set (default) value
LQ US ISO-6 ASCII Diablo US IBM US
1 (France) LQ France ISO-25 France Diablo France
2 (Germany) LQ Germany HP German Diablo Germany
3 (UK) LQ U.K. ISO-4 U.K. Diablo U.K.
4 (Denmark/Nor-
way)
LQ Denmark ISO-60 Norway Diablo Denmark IBM D/N
5 (Sweden) LQ Sweden ISO-11 Swedish Diablo Sweden
6 (Italy) LQ Italy ISO-15 Italian Diablo Italy
7 (Spain) LQ Spain HP Spanish Diablo Spain
8 (Japan) LQ Japan ISO-14 JIS ASCII Diablo Japan
9 (US Legal) LQ US Legal US Legal US Legal US Legal
10 (IBM PC-850) IBM PC-850 IBM PC-850 IBM PC-850
11 (IBM PC-860) IBM PC-860 IBM PC-860 IBM PC-860
12 (IBM PC-863) IBM PC-863 IBM PC-863 IBM PC-863
13 (IBM PC-865) IBM PC-865 IBM PC-865 IBM PC-865
14 (Norway) LQ Norway
15 (Denmark 2) LQ Denmark 2
16 (Spain 2) LQ Spain 2
17 (Latin America) Latin America
To Next Page
Loading...
Need help?
General
