RWRF T
257
RWRF T — [Read/Write Resource File] set
Terminate string
Format
RWRF T[, ’terminator’];
Parameters
terminator:
ASCII text string up to 4 bytes
Set to default "WRED" if omitted.
Function
The RWRF T command changes a terminator (default: WRED).
The terminator that was changed with this command is also available for the LAPI
command to load the API program.
Turning the power on again will return the changed terminator to "WRED".
Example:
Change the terminator to "TEST".
!R! RWRF T , "TEST"; EXIT;
To Next Page
Loading...
Need help?
General
