TPRS
351
TPRS — Text PaRSing
Format
TPRS mode;
Parameter
mode:
0 = ANK (alphabetic numeric and kana)
1 = shift JIS (2-byte code)
Function
The TPRS command allows character codes to be interpreted as 1-byte or 2-byte
character code while printing using a text command.
To parse such characters, the current font must supports 2-byte characters and a 2-byte
symbol set such as Windows 3.1J (19K). The pursing method will automatically be shift
JIS encoding (2) if the default font and symbol set is of 2-byte.
This command is valid only in HP emulation.
To Next Page
Loading...
Need help?
General
