INTL
129
INTL — InterNaTionaL characters
Format
INTL country-code, code-set;
Parameters
country-code:
0 = US ASCII
1 = France
2 = Germany
3 = UK
4 = Denmark/Norway
5 = Sweden
6 = Italy
7 = Spain
8 = Japan
9 = US Legal
10 = IBM PC-850 (Multilingual)
11 = IBM PC-860 (Portuguese)
12 = IBM PC-863 (Canadian French)
13 = IBM PC-865 (Norwegian)
14 = Norway
15 = Denmark 2
16 = Spain 2
17 = Latin America
code-set:
0 = Epson code set
1 = HP LaserJet code set
2 = Daisywheel code set
4 = IBM/Line Printer code set
Function
The INTL command selects a symbol set appropriate for the alphabet of a particular
country. A symbol set includes the specific alphabetic and numeric characters and other
symbols of a particular written language, country, or software application. Charts of the
available symbol sets are displayed in Emulation of the Technical Reference manual,
emulation by emulation.
Depending on the current emulation, the printer selects one of the symbol sets of the
emulated printer appropriate for the country as requested by the country-code value. For
example, when the printer is set in the default emulation mode 6 (HP LaserJet), country
code 0 (US ASCII) selects the ISO-6 ASCII symbol set of the HP LaserJet printer. If the
current emulation mode is 1 (IBM), country code 0 selects the IBM US symbol set of the
IBM Proprinter.
Differences in symbol sets can be seen in the upper half of the character code table,
consisting of character codes 128 through 254 (hex 80 through FE). The availability of
the symbol sets to the country-code values appear in the table below.
To Next Page
Loading...
Need help?
General
