PRESCRIBE Command Reference
40
BLK — draw filled-in BLocK
Format
BLK width, depth[, option];
Parameters
width:
width of the block
depth:
depth of the block
option:
B = Leave the cursor unmoved (Default)
H = Move the cursor to the horizontally adjacent corner
V = Move the cursor to the vertically adjacent corner
E = Move the cursor to the diagonally oppos
i
te corner
L = Move the cursor one line down
N = Move the cursor to the beginning of the next line
Function
The BLK command draws a block of a specified size with one corner at the current
cursor position. The block is filled in with the pattern designated by the previous PAT,
FPAT, or GPAT command. The cursor is moved as specified by the option. If the option
is omitted, the cursor is not moved (same as option B).
To Next Page
Loading...
Need help?
General
