PRESCRIBE Command Reference
184
PAT — select fill PATtern
Format
PAT pattern-number[, resolution];
Parameters
pattern-number:
number from 1 to 60 or 100 to 105
resolution:
300 [dpi], 600 [dpi], or 1200 [dpi]
Function
The PAT command specifies the shading pattern used by the BLK and ARC commands
and to fill a path.
The pattern-number should be any number between 1 through 60 if a resident pattern is
selected. A full list of the printer’s resident patterns appear on the following page.
Pattern numbers 100 through 105 are reserved for selecting the expanded patterns and
can be generated by using the XPAT command. If you specify a pattern number between
100 and 105 when no expanded patterns are defined, the printer selects the No. 1 (solid
black) resident pattern.
Variable resolution support is valid for 600 dpi and 1200 dpi models only.
To Next Page
Loading...
Need help?
General
