PRESCRIBE Command Reference
344
STRK — STRoKe current path
Format
STRK;
Parameter
None
Function
The STRK command strokes the constructed path onto the current page according to the
following current graphics state:
• Pen diameter (SPD)
• Dash pattern (DPAT)
• Fill pattern (FPAT)
• Line cap (SCAP)
• Line join (SLJN)
• Flatness (FLAT)
A path itself will not place a line or graphic on a page because PRESCRIBE path-
construction commands only define the path. For the path to be drawn or filled as a line,
box, character, etc., on the page, the STRK command must be issued.
After stroking the current path, the STRK command clears the path and moves the cursor
to the end of the path.
File
!R! RES; UNIT C;
NEWP;
PMZP 7, 17;
SPD .2;
PDRP -2.5, 0, 0, 2.5, 2.5, 0, 0, -2.5;
PDRP 2.1, 1.25, 1.25, -2.1, -2.1, -1.25, -1.25, 2.1;
PMRP 0, 2.5;
PDRP 2.1, -1.25, 1.25, 2.1, -2.1, 1.25, -1.25, -2.1;
STRK;
PAGE;
EXIT;
To Next Page
Loading...
Need help?
General
