Overview of PRESCRIBE Commands by Function
9
Debug Commands
These commands can be used to check the print data in hexadecimal format for print jobs
with unexpected output.
External Media Control Commands
If an external storage, such as JEIDA Ver. 4 memory card or CompactFlash card, or a
hard disk, is installed in the printing system, the following commands can be used to
write data to or read from it. These commands do not apply to the models that do not
have an external storage.
DAM Delete All Macros 72
DELM DELete Macro 76
EMCR Enable MaCRo depending on paper source 89
ENDC END carbon Copy 92
ENDM END Macro 94
MCRO define MaCRO 160
Command Function Page
ENDD END Dump 93
RDMP Received-data DuMP 218
Command Function Page
RWER D [Read/Write External Resource] Delete data on external media 242
RWER F [Read/Write External Resource
]
Format external media 243
RWER I [Read/Write External Resource] automatically print partition Infor-
mation
244
RWER L [Read/Write External Resource] print partition List 245
RWER R [Read/Write External Resource] Read
data
from external media 246
RWER S [Read/Write External Resource] St
ore TrueType font 247
RWER T [Read/Write External Resource] set Terminate string 249
RWER W [Read/Write External Resource] Write data to external media 250
RWRF D [Read/Write Resource
Fil
e] Delete data on external device 252
RWRF F [Read/Write Resource File] Format external device 253
RWRF L [Read/Write Resource File] print resource file List 25
4
RWRF P [Read/Write Resource File] set hidden file 25
5
RWRF R [Read/Write Resource File] Read 256
RWRF T [Read/Write Resource File] set T
erminate string 257
RWRF W [Read/Write Resource File] Write data to external device (API pro-
gram)
258
RWRF W [Read/Write Resource File] Write data to external device (font) 259
RWRF W [Read/Write Resource File] Write data to external device (macro) 261
RWRF W [Read/Write Resource File] Write data to external device (printable
data)
262
WRED WRite EnD 362
Command Function Page
To Next Page
Loading...
Need help?
General
