Overview of PRESCRIBE Commands by Function
5
Fonts are more fully explained in Chapter 4 of the Technical Reference manual.
Cursor Movement Commands
These commands move the cursor to specific positions. Cursor movements can be
established for absolute positions based on the margins, zero point positions based on the
printable area, or relative positions based on the current cursor position.
Cursor movement commands only change the position of the cursor. Also, the cursor
may not be moved outside of the printable area (see MZP command). It is possible to
store the cursor position in memory then to return to that position stored in memory.
Vector Graphics Commands
The commands below are used to create figures such as lines, circles, and rectangles, and
to add shading, simply by adding parameters.
It is possible to specify colors for all vector graphics. For details, see a color specific
command such as SCOL.
CSET Change symbol SET by symbol-set ID 65
DAF Delete All Fonts 71
DELF DELete Font 75
FLST print Font LiST 105
FONT change current FONT 108
FSET change current Font SETting by characteristic 115
FTMD bitmap FonT MoDe 119
INTL InterNaTionaL characters 129
LDFC LoaD Font Character 147
LDFN C generate bitmap character f
o
r LoaDing FoNt 149
LDFN F create header for LoaDing FoNt 151
LDFN S LoaD truetype FoNt 153
RPCS Return to Previous Code Set 226
RPF Return to Previous Font 227
SCCS Save Current Code Set 268
SCF Save Current Font 270
SETF SET alternate Font 288
SFA Set bitmap Font Attributes 290
SFNT Select current FoNT by
typeface 294
TPRS Text PaRSing 351
Command Function Page
MAP Move to Absolute Position 157
MRP Move to Relative Position 167
MRPA Move to Relative Position specified by Angle 169
MZP Move to Zero-relative Position 174
RPP Return to Previous Position 230
SCP Save Current Position 275
Command Function Page
To Next Page
Loading...
Need help?
General
