Kyocera TASKalfa 2201 - Adj Calc Rate

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-68
U332 Adj Calc Rate
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Letter
size.
Setting
1. Press the start key.
2. Change the setting using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description Setting range Initial setting
Rate Size parameter. 0.1 to 3.0 1.0
* : Initial setting: 1.0 (A4/Letter)
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.