Kyocera TASKalfa 2201 - Set Mnt Time Disp

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-70
U345 Set Mnt Time Disp
Description
Sets when to display a message notifying that the time for maintenance is about to be reached,by
setting the number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the main-
tenance count reaches the set value, the message is displayed.
Purpose
To change the time for maintenance due indication.
Setting
1. Press the start key.
2. Select the item to be changed.
3. Change the setting using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display Description Setting range Initial setting
Cnt Time for maintenance due indication
(Remaining number of copies that can be
made before the current maintenance
cycle ends)
0 to 9999 0
Clear A value is cleared. - -
4. Press the start key. The value is set.
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.