Kyocera TASKalfa 2201 - Fuser Eject Sensor Retention; Fuser Eject Sensor Retention (Casette 3 Feeding); Fuser Eject Sensor Retention (Duplex Feeding); Fuser Eject Sensor Retention (MPF Feeding)

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-4-5
4211 Fuser eject sensor retention
(Casette 1 feeding)
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 1.
D
4212 Fuser eject sensor retention
(Casette 2 feeding)
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 2 (paper feeder).
D
4213 Fuser eject sensor retention
(Casette 3 feeding)
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 3 (paper feeder).
D
4214 Fuser eject sensor retention
(Casette 4 feeding)
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 4 (paper feeder).
D
4218 Fuser eject sensor retention
(Duplex feeding)
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from duplex section.
D
4219 Fuser eject sensor retention
(MPF feeding)
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from MP tray.
D
9000 DP original feed sensor ON
undetected
DP feed sensor (DPOFS) does not turn on within
specified time during the first sheet feeding (Retry
5 times).
F
9001 DP narrowing DP timing sensor (DPTS) turns off within the
specified time since the sensor turns on.
F
9002 DP initial Jam Sensor in the conveying system is on since origi-
nal feeding starts.
F
9004 DP registration sensor OFF
undetected
DP registration sensor (DPRS) is not turned on
within specified time since original switchback
operation starts.
F
9010 DP unit open Document processor is opened during original
feeding.
F
9011 DP cover open The DP top cover is opened during original feed-
ing.
F
9110 DP original feed sensor OFF
undetected
DP original feed sensor (DPOFS) does not turn
off within specified time of DP timing sensor
(DPTS) turning on.
F
9200 DP registration sensor ON
undetected
DP registration sensor (DPRS) does not turn on
within specified time of DP original feed sensor
(DPOFS) turning on.
F
9400 DP timing sensor ON unde-
tected
DP timing sensor (DPTS) does not turn on within
specified time of DP original feed sensor
(DPOFS) turning on.
F
9410 DP timing sensor OFF unde-
tected
DP timing sensor (DPTS) does not turn off within
specified time of DP original feed sensor
(DPOFS) turning off.
F
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).