Kyocera TASKalfa 2201 - Detaching and Refitting the PWB (PSPWB)

2NC/2NF/2NG/2NN/3P7/3P8/3P9
2-2-27
(4) Detaching and refitting the PWB. (PSPWB)
Procedure
1. Remove seven screws.
2. Remove the rear cover by pulling
upward and releaseing three hooks.
Figure 2-2-28
3. Remove two screws and then remove
the mounting plate.
Figure 2-2-29
Hook detail
Screw
Screw
Screws
Screw
Screw
Screw
Rear cover
Hooks
Screw
Screw
Mounting plate