Kyocera TASKalfa 2201 - Detaching and Refitting the Exit Rear Cover; Detaching and Refitting the Middle Rear Cover

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-79
(9) Detaching and refitting the exit rear cover
Pocedure
1. Remove the screw.
2. Remove the exit rear cover forward with
releasing two projections by lifting it up.
Figure 1-5-140
(10)Detaching and refitting the middle rear cover
Pocedure
1. Remove the screw.
2. Release the projection by sliding the
middle rear cover backward.
3. Remove the middle rear cover forward
during turning it.
Figure 1-5-141
Screw
Exit rear cover
Projection
Projection
Screw
Fan
Screw
Middle rear cover
Projection