Kyocera TASKalfa 2201 - Remarks on Main;Engine PWB Replacement

2NC/2NF/2NG/2NN/3P7/3P8/3P9
2-2-13
8. Remove five screws.
9. Remove the main/engine PWB.
10. Check or replace the main/engine PWB
and refit all the removed parts.
Figure 2-2-9
(5) Remarks on main/engine PWB replacement
NOTE: When replacing the PWB, remove the
EEPROM (U5) from the main/engine PWB and
then reattach it to the new PWB.
Figure 2-2-10
Screw
Screw
Screw
Mounting plate
Screw
Main/engine PWB
Screw
Screw
Screw
Screw
Main/Engine PWB
EEPROM (U5)