Kyocera TASKalfa 2201 - DP Main PWB (DPMPWB) - Connector Lists

2NC/2NF/2NG/2NN/3P7/3P8/3P9
2-2-34
(3) Connector lists
Connector Pin Signal I/O Voltage Description
YC2
1GND
- - Ground
Connected to
main/engine
PWB
2GND
- - Ground
3GND
- - Ground
4GND
- - Ground
524V4
I 24 V DC 24 V DC power input from M/EPWB
624V4
I 24 V DC 24 V DC power input from M/EPWB
73.3V4
I 3.3 V DC 3.3 V DC power input from M/EPWB
83.3V4
I 3.3 V DC 3.3 V DC power input from M/EPWB
9DP_CLK
I 0/3.3 V DC(pulse) DP clock signal
10 DP_SO
I 0/3.3 V DC Serial communication data signal
11 DP_SEL
I 0/3.3 V DC DP select signal
12 DP_SI
O 0/3.3 V DC Serial communication data signal
13 DP_RDY
O 0/3.3 V DC DP ready signal
14 DP_TMG
O 0/3.3 V DC DPTS: On/Off
15 DP_OPEN
O 0/3.3 V DC DPOCS: On/Off
16 FG
YC3
124V2
O 24 V DC 24 V DC power output to DPMPWB
Connected to
right cover
switch
2NC
-- Not used
3 24VIL_DP
I 24 V DC 24 V DC power input from DPRCSW
YC4
13.3V2
O 3.3 V DC 3.3 V DC power output to DPMPWB
Connected to
DP original
sensor, DP
original feed
sensor, DP
registration
sensor, DP
open/close
sensor, DP
shiftback
sensor and
DP timing
sensor
2GND
- - Ground
3 SET_SW
0/3.3 V DC DPOS: On/Off
43.3V2
O 3.3 V DC 3.3 V DC power output to DPMPWB
5GND
- - Ground
6FEED_SW
0/3.3 V DC DPOFS: On/Off
73.3V2
O 3.3 V DC 3.3 V DC power output to DPMPWB
8GND
- - Ground
9 REGIST_SW
0/3.3 V DC DPRS: On/Off
10 3.3V2
O 3.3 V DC 3.3 V DC power output to DPMPWB
11 GND
- - Ground
12 DP_OPEN_S
W
0/3.3 V DC DPOCS: On/Off
13 3.3V2
O 3.3 V DC 3.3 V DC power output to DPMPWB
14 GND
- - Ground
15 HP_SW
0/3.3 V DC DPSBS: On/Off
16 3.3V2
O 3.3 V DC 3.3 V DC power output to DPMPWB