Kyocera TASKalfa 2201 - High Voltage PWB (HVPWB) - Connector Lists

2NC/2NF/2NG/2NN/3P7/3P8/3P9
2-2-17
(3) Connector lists
Connector Pin Signal I/O Voltage Description
YC1
1+24VIL
I 24 V DC 24 V DC power input from M/EPWB
Connected to
main/engin
PWB
2DBCLK
I 0/3.3 V DC(pulse) Developer clock signal
3 DBDCCNT
I 0/3.3 V DC(pulse) Developer DC output shift signal
4TREM
I 0/3.3 V DC Transfer DC: On/Off
5TCNT
I 0/3.3 V DC(pulse) Transfer DC control signal
6MCNT
I 0/3.3 V DC(pulse) Charging DC control signal
7 MISENS
O Analog Charging current detection signal
8SREM
I 0/3.3 V DC Separation DC: On/Off
9 SISEL
I 0/3.3 V DC Separation DC shift signal
10 GND
- - Ground