2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
1-3-38
Adjustment: Trailing edge registration
1. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
For copy example 1, increase the value. For copy example 2, decrease the value.
Figure 1-3-11
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Original
Copy
example 1
Copy
example 2
To Next Page
Loading...
