Kyocera TASKalfa 2201 - Detaching and Refitting the Drive Unit

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-57
(1) Detaching and refitting the drive unit
Procedure
1. Remove the cassette from the main unit
by pulling forward.
Figure 1-5-96
2. Remove the screw.
3. Remove the primary paper feed unit
from main unit by pulling forward.
Figure 1-5-97
Cassette
Main unit
Primary paper feed unit
Screw
Main unit