Kyocera TASKalfa 2201 - Detaching and Refitting the Separation Needle Holder

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-45
(2) Detaching and refitting the separation needle holder
Procedure
1. Remove upward the separation needle
holder and separation needle by releas-
ing three hooks of rear side of the sepa-
ration needle holder.
2. Check or replace the separation needle
and refit all the removed parts.
Figure 1-5-76
Hook
Separation needle holder
Separation needle