2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-69
42. Remove four connectors from the
clutches and the motor.
43. Remove the wire guide by releasing
two projection parts of the wire guide
and lifting it upwards.
Figure 1-5-120
44. Remove the screw.
45. Remove the clutch cover by unhooking
three hooks.
46. Pull two clutches out.
*: It is not dropping a clutch, when removing
a cover.
Figure 1-5-121
Clutch
Connectors
Connector
Motor
Clutch
Wire guide
Projection
parts
Clutch
Clutch
Hook
Hook
Hook
Screw
Clutch cover
To Next Page
Loading...
