2NC/2NF/2NG/2NN/3P7/3P8/3P9
2-2-20
9. Pull the developer evacuation lever for-
ward.
10. Remove the developer unit by pulling
forward.
11. Check or replace the developer unit and
refit all the removed parts.
Figure 2-2-17
12. Open the right cover.
13. Remove the screw.
14. Remove the drum unit by pulling it for-
ward.
*: Be careful to not touch a drum or not to
hit.
15. Check or replace the drum unit and refit
all the removed parts.
Figure 2-2-18
Developer
evacuation lever
Developer unit
Screw
Drum unit
Drum
To Next Page
Loading...
