2 SETTING ITEMS (ADMIN)
144 IEEE 802.1X Authentication Setting
2
Select the desired inner authentication method and continue the operation that you
require.
P.144 “Setting EAP-MSCHAPv2 for inner authentication”
P.145 “Setting PAP for inner authentication”
P.147 “Setting CHAP for inner authentication”
P.148 “Setting EAP-MD5 for inner authentication”
Setting EAP-MSCHAPv2 for inner authentication
1
Select [EAP-MSCHAPv2] and press [Next].
The WIRED 802.1X SETTINGS (EAP-MSCHAPv2) screen is displayed.
2
Specify the following items as required and press [Next].
[EAP-USER NAME] — Press this button to enter the EAP-User Name.
[PASSWORD] — Press this button to enter the authentication password.
[RETYPE PASSWORD] — Press this button to re-enter the authentication password.
When you press the above buttons, the on-screen keyboard is displayed. Enter a value using the keyboard and
digital keys, and press [OK] to set the entry.
To Next Page
Loading...
