142 CHAPTER 5
Troubleshooting
Problem Possible cause(s) Solution(s)
The green START
C
YCLE button
functions as a
press-and-hold
button instead of a
just-press button.
There is a deffective
electrical harness.
Apply the electrical system
troubleshooting between
the packer module and the
corresponding packer
control station. Call the
Labrie Customer Support
Center for details.
The packer module is
deffective.
Apply the packer module
trobleshooting. Call the
Labrie Customer Support
Center for details.
Problem Possible cause(s) Solution(s)
The packer moves
forward but stops
at the end of the
stroke.
The packer wear plates are
worn out.
Replace the wear plates.
The packer extension limit
switch needs adjustment.
Adjust the packer
extension limit switch.
To Next Page
Loading...
Need help?
General
