Labrie expert 2000 Service Manual

60 CHAPTER 3
Maintenance
Figure 92. Side rail and deflector
stand
11. Unbolt the side rails from the
right- and left-hand side hopper
walls (Figure 92. “Side rail and
deflector stand” & Figure 93.
“Side rails removal”);
Figure 93. Side rails removal
12. When both side rails are
removed, start the engine and
engage the hydraulic pump;
13. Extend the packer about
12 inches before the end of the
stroke;
14. Turn the engine and hydraulic
pump off;
15. Replace both wear pads and bolt
them back in place;
16. Start the engine and engage the
hydraulic pump;
17. Retract the packer;
18. Reinstall the side rails, plastic
shields and deflector stands
back in place.
19. Turn the engine and hydraulic
pump off;
Deflector
Stand
Side Rail
Side Rail
DANGER
NEVER CLIMB IN THE HOPPER WHILE
THE
ENGINE IS RUNNING.
DANGER
NEVER CLIMB IN THE HOPPER WHILE
THE
ENGINE IS RUNNING.

Labrie expert 2000 Specifications

General

Brand	Labrie
Model	expert 2000
Category	Utility Vehicle
Language	English