Labrie MINIMAX Maintenance Manual

38 General Maintenance
2. Once the packer is placed in a safe work area, cut off the wear plate panel (see Figure 3-24).
Figure 3-24 Cutting the wear plate panel
3. Weld the new wear plate panel to the packer (see Figure 3-25 for welding specifications).
Figure 3-25 Welding specifications
NOTE: This operation is valid for the wear plate panels located on both sides of the packer.
Reinstall the packer inside the body (see Reinstalling the Packer below).
Warning!
When reinstalling the packer, always ensure total clearance to avoid any accidents.
Cut here

Labrie MINIMAX Specifications

General

Brand	Labrie
Model	MINIMAX
Category	Trucks
Language	English