Labrie MINIMAX Maintenance Manual

42 General Maintenance
Figure 3-28 Packer rollers assemblies (3 on each side)
Figure 3-29 Packer roller
7. Place a 2-by-4 woodblock under the first panel, long enough to hold the panel in place once the
roller (see Figure 3-29) is removed.
You may also use jack stands instead of woodblocks for that purpose.
8. Remove the left-hand side roller assembly of the first panel and replace it:
8 a. Using a 5⁄16-inch Allen wrench and a 3⁄4-inch box, remove all 4 bolts that keep the roller in
place (see Figure 3-30).
Figure 3-30 Removing bolts

Labrie MINIMAX Specifications

General

Brand	Labrie
Model	MINIMAX
Category	Trucks
Language	English