EasyManua.ls Logo

Laguna Tools PP16 XC Pro - Page 7

Laguna Tools PP16 XC Pro
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. INFORMATION
3
12) Have your machine repaired by a qualified person.
Repairs should be carried out by qualified-persons using original spare
parts; otherwise this may result in considerable danger to the user.
13) Check any damaged parts.
Before using the machine further, the guard or other damaged part should
first be carefully checked to determine if it will operate properly and perform
its intended function. Check the alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced.
14) Disposing of wasted material
Disposing wasted material and wasted lubricating oil shall obey the local
regulation and be deeply careful.
15) Fire extinguisher:
Workshop of user shall be with the fire extinguisher or other devices
according to the local safety regulations and be deeply careful.
16) Stand on proper position for operation.
Please stand in front of machine for operation.
17) Use recommended ancillary equipment.
Consult of the instruction manual of drawing for recommended accessories.
The use of improper accessories may cause risk of injury to persons. If
ancillary equipment is removed the original guards or safety devices shall
be replaced.
OAV and our authorized agency are responsible for a future connection of
the machine with ancillary equipment only if we ourselves have designed
such connection.
18) Reduce the risk of unintentional starting.
Make sure switches of control panel are OFF position before operating.
19) Never leave machine running unattended. Turn power off from the
hand-held disconnecting device. Don't leave machine until it comes to a
complete stop.
20) Make sure machine is disconnected from power supply.
Make sure machine is disconnected from power supply before started the
normal maintenance and service, adjustment, or repairing.
21) Reaction with emergency situation.
This machine provides two emergency buttons. One is self-latching
push-button on the control panel of access position. Other emergency

Table of Contents