149
9 Appendix
Appendix
to the EC Declaration of Conformity
or EC Manufacturer’s Declaration
Month/Year:
................................April../...2010............................
Product type: ETAMATIC / ETAMATIC S
.............................................................................
.............................................................................
.............................................................................
Conformance of the product with the previously mentioned directives is given according to the following standards:
Harmonised European Standards:
Reference-Number:
EN 298
EN 230
EN 1643
EN 12 067-2
Application standards:
EN 676
EN 267 when applicable
EN 12 952-8 and -11 when applicable
EN 12 953-7 and -9 when applicable
EN 50 156-1 when applicable
Other standards:
EN 61508 part 2 and 3
To Next Page
Loading...
