6
1 General Information
1 General Information
1.1 Validity of these Instructions
These instructions apply to the ETAMATIC and ETAMATIC S in any configuration.
These devices conform to the following standards and regulations:
• EN 230
• EN 267 (where applicable)
• EN 298
• EN 676 (where applicable)
• EN 746-2 (where applicable)
• EN 12952-8 and 11 (where applicable)
• EN 12953-7 and 9 (where applicable)
• 2004/108/EC EMC - Directive, Low-Voltage Directive
• 2006/95/EC Low Voltage Directive
• 97/23/EC Pressure Equipment Directive
• 2009/142/EC Gas Appliance Directive
Test symbols: CE-0085 AU 0207
The ETAMATIC is a control unit for combustion systems.
To Next Page
