8
1 General Information
d: CO/O
2
control
e: Customer
f: Connector set
g: Output relays fault
21D 3x DPS and 1x continuous output, FB (feedback) RPM-3L, 300-3600 I/min
22D 3x DPS and 1x continuous output, FB (feedback) RPM-3L, 600-7200 I/min
23D 3x DPS and 1x continuous output, FB (feedback) RPM-3L, 30-300 I/min
24D 3x DPS and 1x continuous output, FB (feedback) RPM-3L, 60-600 I/min
r0 O
2
controller via LAMTEC SYSTEM BUS
r2 O
2
controller via external system
r3 CO/O
2
controller
r4 O
2
controller and correction forwarding master
r5 O
2
controller and correction forwarding slave
r6 CO/O
2
controller and correction forwarding master
r7 CO/O
2
controller and correction forwarding slave
FED Connector set spring tension
INV Connector set inverse
S Connector set standard
0 Without
AP Output relays fault normally open
RP Output relays fault normally closed
To Next Page
Loading...
