Lancom GS-2310P - Page 106

Parameter description:
Port:
The logical port for the settings contained in the same row. Click on the port number in order to configure the schedulers.
Mode:
Shows the scheduling mode for this port.
Weight (Qn):
Shows the weight for this queue and port.
Scheduler Mode:
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this switch port.
Queue Shaper Enable:
Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate:
Controls the rate for the queue shaper. The default value is ?. This value is restricted to ?-1000000 when the "Unit" is
"kbps", and it is restricted to 1-? when the "Unit" is "Mbps.
Queue Shaper Unit:
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The default value is "kbps".
Queue Shaper Excess:
Controls whether the queue is allowed to use excess bandwidth.
Queue Scheduler Weight:
106
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration