EasyManua.ls Logo

Lancom GS-2310P - Page 183

Lancom GS-2310P
217 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RADIUS Authentication Server Configuration
The table has one row for each RADIUS Authentication Server and a number of columns, which are:
#:
The RADIUS Authentication Server number for which the configuration below applies.
Enabled:
Enable the RADIUS Authentication Server by checking this box.
IP Address/Hostname:
The IP address or hostname of the RADIUS Authentication Server. IP address is expressed in dotted decimal notation.
Port:
The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used
on the RADIUS Authentication Server.
Secret:
The secret - up to 29 characters long - shared between the RADIUS Authentication Server and the switch.
RADIUS Accounting Server Configuration
The table has one row for each RADIUS Accounting Server and a number of columns, which are:
#:
The RADIUS Accounting Server number for which the configuration below applies.
Enabled:
Enable the RADIUS Accounting Server by checking this box.
IP Address/Hostname:
The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in dotted decimal notation.
Port:
The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the default port (1813) is used on
the RADIUS Accounting Server.
Secret:
The secret - up to 29 characters long - shared between the RADIUS Accounting Server and the switch.
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
#:
The TACACS+ Authentication Server number for which the configuration below applies.
Enabled:
Enable the TACACS+ Authentication Server by checking this box.
IP Address/Hostname:
The IP address or hostname of the TACACS+ Authentication Server. IP address is expressed in dotted decimal notation.
Port:
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0 (zero), the default port (49) is used on
the TACACS+ Authentication Server.
Secret:
The secret - up to 29 characters long - shared between the TACACS+ Authentication Server and the switch.
183
LANCOM GS-2310P/GS-2326(P) User Manual
5 Security

Table of Contents

Other manuals for Lancom GS-2310P

Related product manuals