Lantech QL-400 - Residual Risk

SAFETY
18
4.7 Residual Risk
Residual Risk - There is a risk when you operate, repair this machine even when personnel obeys all
safety requirements.
Q Series®, S Series™, Lanringer and Ring Straddle
Risk:
There is a risk of shock when you perform a troubleshooting task with the power to the
machine “On”.
Make sure that only qualified personnel complete these tasks when the power to the machine
is “On”.
PPE
Use of PPE against injury is not applicable
Q Series® and S Series™
Risk:
The Film Delivery System (FDS) can fall during maintenance if you do not use sufficient
support to hold the FDS.
Make sure that the supports hold the FDS when you change, adjust, repair the lift motor or
belt.
PPE
Use of PPE against injury is not applicable
Q Series®
Risk:
The counterweight can fall during maintenance if you do not use sufficient support to hold it.
Install the FDS shipping brackets and the counterweight brackets before you change, adjust,
repair the lift motor or belt.
PPE
Use of PPE against injury is not applicable