OPERATOR INSTRUCTIONS
25
6.0 Operator Instructions
Note: Illustrations are for reference only.
Note: Functions, descriptions and data can be different on your machine. Refer to Section 3 Options.
Note: It is important to know all components. This includes how to thread the film and operate the
controls.
Note: Some machines have a remote Emergency Stop. It is important to know the location of all E-stops
before you operate the machine.
WARNING
Obey all Lockout/Tagout procedures before you change, adjust, repair a part.
WARNING
Obey all safety decal instructions and warnings.
WARNING
Do not make a change to this machine without approval from Lantech. It can
cause a safety hazard and cancel the warranty.
WARNING
Do not use this machine with hazardous materials.
Do not operate this machine in a hazardous environment.
Do not operate this machine in an explosive environment.
CAUTION
Do not use a sharp object to remove the film that is wound onto the pre-stretch
roller. It can cause damage to the roller.
CAUTION
Do not let a heavy load stay on the turntable for a long period of time. This can
cause damage to the Urethane Ring.
CAUTION
The Load Height Sensor is a Class 1 Laser
Do not stare into the Laser Beam
To Next Page
Loading...