Lantech QL-400 - Introduction

INTRODUCTION
5
1.0 Introduction
Section 1 – Introduction
This manual tells the operator and maintenance personnel how to safely install and operate the
machine.
The function of the manual is to make sure that the operator and maintenance personnel have
complete instructions.
Section 2 – Specifications
Section 3 - Options
These sections contain data about your machine and special options.
This is important as you install and operate the machine.
Section 4 - Safety
This section points out the Warnings and Cautions to make sure that all personnel work
in a safe environment.
Section 5 – Installation
Section 6 – Operator Instructions
These sections tell you how to install and use the machine safely and efficiently.
Section 7 – Maintenance
This section tells you how to make sure that the machine stays at top performance.
Section 8 – Appendix
This section can include the CE – Declaration of Conformity, Glossary and Warranty
procedures.
Section 9 – Parts List and Drawings
This section includes the Bill of Materials (BOMs)
This manual helps you operate your machine safely and efficiently.
The value is to increase your productivity and decrease the packaging costs.