Lantech QL-400 - Manual Jog; Film Settings

OPERATOR INSTRUCTIONS
43
6.5.4 Manual Jog
Manual Jog
This screen gives access to the manual controls and
settings for the machine
Film Delivery System
(FDS)
Use the arrows to move the FDS in the up, down
directions.
Use the Speed control to increase, decrease the FDS
travel speed.
Rotation
Use the arrows to move the Turntable in the forward,
reverse directions.
Use the Speed control to increase, decrease the
Rotation speed.
6.5.5 Film Settings
Film Settings
Use this screen to set the width (mm, inch) and the
thickness (gauge, micron) of the film.