EasyManuals Logo

Lantech QL-400 User Manual

Lantech QL-400
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
MAINTENANCE
70
7.1 Daily and Weekly Maintenance
Daily and Weekly Maintenance
Tighten, replace loose fasteners.
Look for oil leaks.
Listen for unusual noise during operation.
7.1.1 Pallet Grip
Remove the debris from in and around the
Pallet Grip.
Make sure that the tilting roller moves
freely and retracts fully.
Examine the groove roller and make sure
that it turns freely.
Make sure that the film moves over the
groove in the roller as the load wraps.
7.2 Monthly Maintenance
Examine the FDS belt for wear.
Examine all belts for correct tension.
Examine all belts for wear.
Examine the pre-stretch chains and sprockets for wear.
Lubricate the chains with SAE 30 oil.
Refer to section 3, Options, for other lubrication requirements.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantech QL-400 and is the answer not in the manual?

Lantech QL-400 Specifications

General IconGeneral
BrandLantech
ModelQL-400
CategoryStretch Wrapping Systems
LanguageEnglish