LAUNCH PAD V
User's Manual
39
Fig. 5-45
Tap the “Web Remote” tab, the screen displays as follows:
Fig. 5-46
1. Slide the switch “Allow device to be connected to the WEB client
remote diagnostic device” to ON so that the partner can fi nd and
connect to this device while using the PC.
2. Notify the partner of the PC client website http://remote.x431.com/
cn/. When the partner accesses the link, the PC displays as below:
*Note: Before processing remote diagnosis, please make sure the tablet
is properly connected to the vehicle.
Fig. 5-47
3. Tell the partner to input his own official technician account and
password, and then tap “Login” to navigate to the following fi gure.
Fig. 5-48
4. Tell the partner to check the box “Serial number” and enter the
To Next Page
Loading...
