LAUNCH PAD V
User's Manual
47
6.12 Change Password
This item allows you to modify your login password.
6.13 Settings
It enables you to make some application settings and view software
version information etc.
6.13.1 Units
It is designed to confi gure the measurement unit. Metric System and
English System are available.
6.13.2 Shop Information
This option lets you define your print information. It mainly includes
Workshop, Address, Telephone, Fax and License Plate.
After inputting, tap “Save”.
Once you saved the print information, it will be entered automatically
in the “Add Information” box every time you save the diagnostic report.
6.13.3 Printer Set
This option is used to establish a wireless connection between the
tablet and the printer (sold separately) while performing printing
operations.
The App is compatible with the “LAUNCH Wi-Fi Printer” (sold
separately) and “System” printer (external printers loaded with Wi-Fi
hotspot).
Here we take “LAUNCH printer” for example to demonstrate how to
confi gure the printer.
1. Tap “Printer Set”.
Fig. 6-8
A. If it is the fi rst time you have operated this printer, please proceed
the following:
2. For initial use, you are suggested to reset the printer: Press and
hold [MODE] & [FEED] for 8 seconds, the following resetting
command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
3. Tap “Reset” to confi gure Wi-Fi printer.
Step 1: Connect the printer:
Tap “Scan” to start scanning and select the desired printer hotspot
named with X-431PRINTER-XXXX (XXXX stands for 4 characters),
and then tap “Connect” to enter Step 2.
Step 2: Join the Wi-Fi printer into LAN:
Tap “Scan” to select the desired local Wi-Fi network from the
list, and type in the security password (If it is an open network,
To Next Page
Loading...
Need help?
General
