LAUNCH PAD V
User's Manual
45
Fig. 6-4
On-screen Buttons:
Graph – displays the parameters in waveform graphs.
Value – this is the default mode which displays the parameters in texts
and shows in list format.
Combine – this option is mostly used in graph merge status for data
comparison. In this case, different items are marked in different colors.
Frame Playback – plays back the recorded data stream items frame
by frame. Once it is in frame playback mode, this button changes into
“Auto Playback”.
Remote Diagnostic Report lists all diagnostic reports generated in
process of remote diagnosis.
6.2 VCI
This option allows you to manage all your activated VCI devices.
If several VCI connectors are activated on this tool, a list of connectors
will be displayed on the screen. Once you choose the connector that
belongs to other account, you have to log out, and then input the right
account to continue.
6.3 Immobilizer Programmer
X-PROG Immobilizer programmer is specially designed to read and
write vehicle key chip data, clone and produce exclusive keys. It only
works together with LAUNCH-specific diagnostic tool to accurately
read and write the data in a quick and reliable manner.
X-PROG Immobilizer Programmer
It only applies to the vehicle with 12V battery voltage and OBD II
diagnostic socket.
Please bind X-PROG to LAUNCH-specifi c diagnostic tool before using
to ensure they can work together.
There are only three chances available for you to bind/unbind the X-PROG
to/from the scanner. Pay extreme caution to do such operations.
Before binding, connection must be made. Refer to the user manual
included with this device for detailed connection.
To Next Page
Loading...
Need help?
General
