48
LAUNCH PAD V
User's Manual
password is not required), and then tap “Confi rm”.
4. Once the Wi-Fi network of the printer is connected and the printer
is found, tap “Printing test” to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory
settings (refer to Step 2 for details) and check whether the current
device and the printer are on the same LAN.
B. If you have confi gured the Wi-Fi printer to the LAN:
2. Tap “Connect to Printer”:
a). If the local network remains as it is, tap “Test Print” directly to test
the printing.
b). If the local network changes, you have to reset the Wi-Fi printer.
6.13.4 Clear Cache
This item is used to clear the App cache.
Tap “Clear Cache”, a pop-up window will appear on the screen. Tap
“OK” to clear cache and the system will restart the App.
6.13.5 About
The software version information and disclaimer are included.
6.13.6 Diagnostic Software Auto Update
This option is used to set whether automatic update function is ON.
6.13.7 Login/Exit from current account
To logout the current user ID, tap “Exit from current account”.
To login the system again, tap “Login”.
6.14 Diagnostic Software Clear
This item allows you to hide/clear the diagnostic software that is not
frequently used.
Tap “Diagnostic Software Clear”, the screen displays as follows:
Fig. 6-9
Under the “Hide Software” tab, select the desired software logo (a
“Checkmark” will show in the checkbox located at the lower right
corner) and tap “Hide”, it will become invisible. Tap “Unhide” to undo
the hide operation.
Under the “Remove Software” tab, select the desired software logo
and tap “Delete”, it will disappear from the screen.
*Note: Removing software may completely delete the software from the
tablet. If some software is not used and the tablet runs out of space, you
can use this feature to remove it. To re-download it, go to “Update” -> “All
Software”.
To Next Page
Loading...
Need help?
General
