Leica Q2 - Acoustic Signals

CAMERA BASIC SETTINGS ▸ ACOUSTIC SIGNALS
65
ACOUSTIC SIGNALS
Some functions can be acknowledged with acoustic signals. The
following special functions can be configured separately:
– Electronic shutter sound
– AF confirmation
VOLUME
The volume of active signals can be set.
Factory setting:
Low
▸ Select Acoustic Signal in the main menu
▸ Select
Volume
▸ Select Low/High
ACOUSTIC SIGNALS
This setting specifies, whether the camera shout output general
notification signals, e.g. during the delay time of the self-timer or as
a warning signal, when the memory card is full.
Factory setting:
Off
▸ Select Acoustic Signal in the main menu
▸ Select
Acoustic Signals
▸ Select On
ELECTRONIC SHUTTER SOUND
Factory setting: Off
▸ Select Acoustic Signal in the main menu
▸ Select
Electronic Shutter Sound
▸ Select On
AUTOFOCUS CONFIRMATION
A signal sound can be selected for successful AF settings.
Factory setting:
Off
▸ Select Acoustic Signal in the main menu
▸ Select
AF Confirmation
▸ Select On
SILENT PHOTOGRAPHY
When pictures should be taken as quietly as possible.
▸ Select
Acoustic Signal in the main menu
▸ Select
Electronic Shutter Sound/AF Confirmation/Acoustic Signals
▸ Select Off for each of these menu items