Leica Q2 - Edit File Names

PHOTO SETTINGS ▸ DATA MANAGEMENT
73
Notes
• When using memory cards that were not formatted with this
camera, the file numbering will begin with 0001 again. Should the
memory card already contain a file with a higher number, then
numbering will be continued from that number.
• A relevant message will be displayed on the LCD panel once folder
number 999 and file number 9999 are reached, and all numbering
must be reset.
• Format the memory card and reset the picture number right after
to reset the folder number to 100.
EDIT FILE NAMES
▸ Select Edit File Name in the main menu
• A keyboard submenu is displayed.
• The input line contains the factory setting “L” as the first letter
of the file name. Only this letter can be changed.
▸ Enter a letter of your choice (see p. 49)
▸ Confirm
Notes
• The change to a file name applies to all subsequent shots or until
a new change is made. The sequential number will not be affected;
but it will be reset when a new folder is created.
• During a reset to factory settings, the first letter will always be
reset to “L”.
• Lower case letters are unavailable.