Leica Q2 - Automatic Setting

PHOTOGRAPHY ▸ ISO SENSITIVITY
92
AUTOMATIC SETTING
The camera automatically adjusts the sensitivity to ambient bright-
ness and/or to the configured shutter-speed/aperture combination.
In conjunction with aperture priority mode, this function extends the
range for automatic exposure control.
▸ Select
ISO in the main menu
▸ Select
Auto ISO
LIMITING SETTING RANGES
A max. ISO value can be set, which will then limit the automatic set-
ting range (
Maximum ISO). A max. exposure time can also optionally
be configured. There are focal length related settings (1/f, 1/(2f ), 1/
(3f), 1/(4f )) and fixed max. shutter speeds 1/2 s and 1/2000 s avail-
able for that purpose.
In the focal length-specific settings, the camera will only switch to a
higher sensitivity if the shutter speed would fall below the set thresh-
old due to low light.
Separate settings are available for flash photography.
LIMITING ISO VALUES
All values from ISO 200 are available.
Factory setting:
6400
▸ Select Auto ISO Settings in the main menu
▸ Select
Maximum ISO
▸ Select the desired value
LIMITING SHUTTER SPEED RANGES
Factory setting: 1/(2f )
▸ Select Auto ISO Settings in the main menu
▸ Select
Min. Shutter Speed
▸ Select the desired value
(1/f, 1/(2 f ), 1/(3f ), 1/(4f ), 1/2000, 1/1000, 1/500 , 1/250, 1/125,
1/60, 1/3 0, 1/15 , 1/8, 1/4, 1/2)
LIMITING ISO VALUES (FLASH)
All values from ISO 200 are available.
Factory setting:
6400
▸ Select Auto ISO Settings in the main menu
▸ Select
Maximum ISO with Flash
▸ Select the desired value
LIMITING SHUTTER SPEED RANGES (FLASH)
Factory setting: 1/(2f )
▸ Select Auto ISO Settings in the main menu
▸ Select
Shutter Speed Limit (Flash)
▸ Select the desired value
(1/f, 1/(2 f ), 1/(3f ), 1/(4f ), 1/2000, 1/1000, 1/500 , 1/250, 1/125,
1/60, 1/3 0, 1/15 , 1/8, 1/4, 1/2)