Leica Q2 - MF Assist Functions - Enlargement in AF Mode

PHOTOGRAPHY ▸ FOCUSING
87
MF ASSIST FUNCTIONS
ENLARGEMENT IN AF MODE
You can access the enlargement function independent of focusing
for a better assessment of the settings.
The
Magnification function must be assigned to the FN button or
thumbwheel button to use this feature (see p. 55).
Accessing the enlargement function
▸ Press the
FN button / thumbwheel button
• An enlarged image section appears. The position of the enlarge-
ment depends on the position of the AF metering field.
• The rectangle within the frame at the top right represents the
current magnification, as well as its position in the displayed
cropped section.
Adjusting the enlargement function
▸ Press the center button
• The image section toggles between magnification factors
(3x/6x).
Changing the position of the enlarged section
▸ Press the directional pad in the relevant direction
Exiting the enlargement function
▸ Tap the shutter button
Notes
• The enlargement function remains active until it is exited.
• The most recently used function and zoom factor will still be set
the next time the function is accessed.
AF ASSIST LAMP
The integrated AF assist lamp allows operation of the AF system in
unfavorable lighting conditions. This lamp comes on while metering
is performed, provided the function is activated.
See p. 81 for settings.
ACOUSTIC AF CONFIRMATION
You can set an acoustic confirmation signal for successful focus
metering in AF mode (see p. 65).