Leica Q2 - Page 90

PHOTOGRAPHY ▸ FOCUSING
90
Adjusting the enlargement function
▸ Press the center button
• The image section toggles between magnification factors
(3x/6x).
Changing the position of the enlarged section
▸ Press the directional pad in the relevant direction
Exiting the enlargement function
▸ Tap the shutter button
Note
• The enlargement will automatically return to normal viewing size
about 5 s after the last movement of the focus ring.
• The most recently magnification function will still be active the
next time the feature is accessed.
ACCESS VIA THE FUNCTION BUTTON
You can access the enlargement function independent of focusing
for a better assessment of the settings.
The
Magnification function must be assigned to the FN button or
thumbwheel button to use this feature (see p. 55).
Accessing the enlargement function
▸ Press the
FN button / thumbwheel button
• An enlarged image section appears. The position of the enlarge-
ment depends on the position of the AF metering field.
• The rectangle within the frame at the top right represents the
current magnification, as well as its position in the displayed
cropped section.
Adjusting the enlargement function
▸ Press the center button
• The image section toggles between magnification factors
(3x/6x).
Changing the position of the enlarged section
▸ Press the directional pad in the relevant direction
Exiting the enlargement function
▸ Tap the shutter button
Note
• The enlargement function remains active until it is exited.